The New Zealand Qualifications Authority
(NZQA) was established by the government to set national training standards.
These standards are known as Unit Standards.
Unit standards are used to qualify all levels of training from
courses delivered by schools, right through to post graduate studies offered at
university. Nationally recognised Certificates are made up of Unit Standards and
they ensure that the training is delivered and assessed to a certain standard
and therefore will be recognised throughout New Zealand and also in some other
countries such as Australia, U.K. and Canada.
Organisations that are registered and accredited by NZQA
can offer training based on Unit Standards. This includes Universities,
Polytechnics, Industry Training Organisations (ITO's) and Private Training
Establishments (PTE's) .
Trainzco provides unit standard based training
and assessment on behalf of Polytechnics, ITO's and PTE's throughout New
Zealand.
Trainzco writes training resources and
assessment tools for ITO's, PTE's and our clients. These resources can
be unit standard, industry or company based packages and include
PowerPoint training tools, resource handout books for trainees and
specific assessment tools that verify an understanding of the
subject/unit being taught.
Trainzco has training packages for the
following units or subjects:
 | NZ Transport Agency - Traffic
Controller for Level 1, Low Volume and Local Road |
| NZ Transport Agency - Site Traffic
Management Supervisor for Level 1, Low Volume and Local Road |
| Auditing and Instruction for
Temporary Traffic Management Worksites |
| Approved Comprehensive Health and
Safety Representative Course |
| Hazards associated in Trench
Work |
| Hazards associated with Working at
Heights |
| Hazards associated with Lifting
Equipment |
| Hazards associated with Manual
Handling |
| Hazards associated with Working Near
Mobile Plant |
| Hazards associated with Substances
Hazardous to Health |
| Hazards associated with Managing the
Public at Worksites |
| Hazards associated with Workshops
and Hand Tools |
| Basic Forklift Safety |
| Comprehensive Forklift Safety |
| Basic Plant Operator Safety |
| Logbooks |
| DG Rule 45001 - Responsibilities |
| 497 - Protect
health and safety in the workplace |
| 1099 - Excavate and trench for
plumbing, gasfitting, or drainlaying |
| 6453 - Demonstrate knowledge
of civil construction works |
| 6454 - Safety principles and
maintain safety on civil construction works |
| 6457 - Use a generator and
compressor for civil construction |
| 6465 - Operate a power-driven
rotary broom |
| 6467 - Operate a plate
compactor on civil construction materials |
| 6469 - Maintain small plant
and equipment on civil construction works |
| 6470 - Operate a handheld
pavement breaker |
| 6472 - Carry out manual
excavation for civil construction works |
| 6476 - Read and Interpret
Civil Construction Plans |
| 6477 - Hand-spread materials
and assist mechanical compacting plant on civil construction works |
| 6479 - Locate and identify
services on civil construction sites |
| 6480 - Assist with survey and
set-out on civil construction works |
| 11304 - Maintain roads by repairing
chipsealed surfaces |
| 12570 - Demonstrate knowledge of the
materials used in road formation |
| 12565 - Apply working drawings and
specifications to civil construction tasks |
| 17327 - Communicate on civil
construction sites |
| 17500 - Apply quality and testing
requirements on civil construction works |
| 17501 - Demonstrate knowledge of
foundation and subgrade on civil construction works |
| 17569 - Safety Observer
Responsibilities in the Workplace |
| 17593 - Apply safe work practices in
the workplace |
| 17599 - Plan a Confined Space Entry |
| 17601 - Produce an occupational
health and safety incident investigation |
| 17602 - Hazard ID and risk
assessment in the workplace |
| 17976 - Operating a light four wheel
drive (4WD) vehicle in an off-road environment |
| 17977 - Develop a plan for off-road
light four wheel drive (4WD) driving |
| 18426 - Hazards associated with
Confined Space Entry |
| 19675 - Safe Operation and
Maintenance of a Road Saw |
| 20198 - Roles and responsibilities
of health and safety representatives |
| 20867 - Respond to fire incidents at
a civil infrastructure worksite |
| 20868 - Emergency Response in the
Civil Infrastructure Industry |
| 20869 - Notifiable works and permits
in the civil infrastructure industry |
| 20870 - Protection of Health, Safety
and the Environment in the Civil Infrastructure Industry |
| 20873 - Health, safety, and
environmental legislation at civil infrastructure sites |
| 20875 - Slinging, lifting, and
placing with an excavator or loader |
| 22290 - Quality assurance
requirements on civil construction works |
| 20877 - Work safely at sites under
Temporary Traffic Management |
| 20878 - Assist with Temporary
Traffic Management for L1, LV and LR |
56 Williams Rd ~ RD4 ~ Palmerston North 4474~ Manawatu
~ New Zealand. Phone enquiries can be made during office hours on +64
(021) 528 266. Send all questions or comments about this web
site the the